BatteriesLab recharged battery packs eshop > Products > Battery BMS > 5S 15A BMS Protection Board 18650 Li-ion Lithium Battery
  • Availability: In stock

5S 15A BMS Protection Board 18650 Li-ion Lithium Battery


5S PCB BMS Protection Board For 18650 Li-ion Lithium Battery Cell -15A

NOTE. Shipped from our warehouse in Europe.
Flat Rate Worldwide shipping
Special Shipping cost for domestic

Image Image

Li-ion Lithium Battery 18650 Charger PCB BMS 18.5V Cell Protection Board 5S


5S 21V 18V


Charging voltage: 21 V
Charge MOS pressure value: 35 V
Discharge MOS pressure value: 35 V
Charging current: 56 A
Continuous discharge current: 15 A
Over current protection: 50/55/60 A
Over current protection delay: 20/25/30 mS
Single section since the power consumption:30 uA
Single section between the power consumption:3 uA
Single section over charge detection voltage:4.18- /4.22V
Over charge recovery voltage 4.05- 4.15 V
Over charge detection delay:0.5/1.0/2.0S
Single section over discharge detection voltage:2.75-2.85 V
Over discharge recovery voltage:2.90-3.20 V
Over discharge detection delay:0.5-2.0S
Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery
Short circuit protection delay 200/500/600 uS
The normal working state of B- to P- resistance:5 mΩ
Continuous 15A current maximum temperature rise:25 ℃
Working environment (humidity) relative humidity: ≥98% (long-term stability under the humidity)
Working environment (temperature) -30 ~ 80℃(in the lower temperature range of long-term stability)


Size: 6.1×2.2cm/2.40×0.87inch
Quantity: 1 Set

Attention: batteries not included

Additional information
Weight 0.02 kg
Back To Top